Stranda

Descender Fjäderlätt 2027

After the fantastic reception of the Descender splitboard, racking up none less than four “editors choice/selection” awards, we decided to up the game with our most technically advanced board so far, the full carbon Descender Fjäderlätt. It’s a split targeting touring where lowest possible weight in combination with a stiffer flex is essential. With it’s double alu stringers that dampens the carbon nervousness it rides through chunder and ice like a glassfiber board. specifications Length: 161, 162 wide, 166 wide Core: All farmed paulownia x-grain with double aluminum stringers and ash reinforced inserts. Construction: Full carbon triax layup using VOC-free epoxy that has the highest bonding strenght tested. Flax dampers at inserts. Topsheet: Lightweight plastic. Profile: Parabolic 4mm camber – with low tip- and tail-rocker. Directional freeride. Base: 5930 Sintered Graphite Electra Hardware: Voile compatible insert pattern. Phantom Herkules clips. Length Weight range kg/lbs Weight (grams +/- 3%) Eff. Edge Nose Width Waist Width Tail Width Sidecut Setback Cent. Stance Stance width Front inserts width Rear insert width 166 Wide 85-120/180-265 2990 1298 311 273 304 9,3 24 58 50-66 285 283 162 Wide 75-100 /165-220 2895 1224 308 269 299 9,1 20 57 47-67 279 281 161 70-95/155-210 2790 1222 299 259 289 8,9 20 57 47-67 269 272 OUTLINE Directional freeride with Power Bumps ™ at inserts adding contact points for ultimate grip on ice BOTTOM SHAPE We build our snowboards with camber and Tip-Tail-Rocker. We distinguish between standard camber and low camber: with low camber, the centre of the board is slightly elevated and the contact points are further towards the centre. The Descender has an unique parabolic 5 mm camber – lifted under rear foot for extra pop and ollie power – with low tip- and tail-rocker. core At Stranda Snowboards we use ash wood and mix it with lighter types of timber as poplar and paulownia. On the Fjäderlätt we use a mix of X-grain paulownia and re inforced the inserts with ash. To dampen the full carbon layup we added double vertical aluminum stringers in to the core. #image_129197972 { width: 100%; } #image_1131243794 { width: 100%; }